Wheel spacers (x2), 3x98, bore 55, CITROEN AX / Visa / Saxo

The WEILDER 3-hole wheel spacers for CITROEN AX, Visa and Saxo significantly improve the handling of your competition vehicle. They allow to center the wheel while widening the way.
WEILDER wheel spacers are made of high-quality anodized aluminium and are specially adapted to each vehicle.
WEILDER 3-hole wheel spacers are available in different thicknesses: 10, 15 or 20mm.

For the installation of these wheel spacers, we advise you to use special studs that will be longer than the original hardware.

Wheel spacers are sold in pairs.

For use in competition, we recommend a combination studs + nuts.

Attention, for safety reasons, it is essential to respect the steps and lengths of the threads.

Mounting wheel spacers for CITROEN AX, Visa and Saxo requires the use of longer studs: length of your original bolt + width of the wheel spacer.
Bolts/bolts not supplied.

Advice before placing your order:
you need to measure your centre distance. The distance between the centre of one of the holes in your rim and the centre of your wheel is measured as follows: multiply this result by 1.155.

Assembly Tip:
The compatibility of our wheel spacers is only ensured for mounting on the original rims of your vehicle.
You need to check the centering length of your hub in order to choose the right thickness of wheel spacers. Some vehicles with long centering, the finest wheel spacers will not be able to be mounted.
If the length of your centering is less than or equal to 11mm, you can mount enlargers of 12mm thickness, if it is less than or equal to 15mm, wheel spacers of 16mm and less than or equal to 19mm, wheel spacers of 20mm.

Suitable for the following vehicles:
CITROEN AX (1996 > 2002)
CITROEN Saxo (1996 > 2002)
CITROEN Visa (3 holes) (1996 > 2002)